- Supports up to 16 points using 8 on-board and 8 wireless points for installation flexibility with perimeter and interior control. Supports keypad points.
- On-board Ethernet port for Conettix IP alarm communication and remote programming, compatible with modern IP networks including IPv6/ IPv4, Auto-IP, and Universal Plug and Play
- Installer-friendly features including on-board USB for easy on-site RPS programming, plus plug-in PSTN and Cellular communication modules for simple installation and future proof upgrades
- Remote system control and notification with email, text messaging, and the Remote Security Control app for Android and iOS mobile devices
- Programmable keypad shortcuts, situation sensitive on-screen help, and a bilingual user interface make system operation simple and easy.
The B3512 Control Panel integrates intrusion and residential fire, providing one simple user interface for both systems. The B3512 provides up to 16 individually identified points in a single area. The control panel includes a built-in Ethernet port for IP network communications, and is compatible with modules that send events to selected public switched telephone network (PSTN), IP network, or cellular network destinations through four programmable route groups.
With the B3512, you can monitor doors, windows, and motion within areas like showrooms or those that hold inventory. Each user can have a personalized passcode, a wireless keyfob, and a credential to control the system.
Use programmable authority levels with restricted privileges to provide service, security, and cleaning personnel with full or limited access. Use the three programmable outputs to turn on lights or open and lock doors. Users can:
• Turn on the system to secure the stock room while you conduct daily business. • Perform tests to ensure your system is working properly.
• Set your system to alarm immediately if a door opens.
• Activate the Watch feature so a tone sounds whenever a customer enters.
• Set a schedule for your system to automatically turn on at closing time.
• Use wireless security options to customize your system.
Central monitoring stations provide 24-hour system monitoring with access to vital services. Professional security personnel can test the system, monitor system activity, and alert the police, fire department, or other emergency response teams if necessary.
• 500 mA not to exceed 1.3 A total current for a burglary system, or not to exceed 1.0 A total current for household fire applications
• 800 mA auxiliary power at 12 VDC
• Four alarm-output patterns
• Programmable bell test
• Three programmable outputs; one high current using a relay, and two trigge outputs
• Output A contact rating is 3 Amps
• High-performance micro-controller provides industry leading system response
• 20 custom point indexes
• Selectable point response time
• Cross point capability
• Fire alarm verification
• Dangerous gas indicator includes carbon monoxide (NFPA 720)
• Watch mode
• A scheduled event (SKED) to perform several functions, such as turn on (arm) the system, turn off (disarm) the system, bypass and unbypass points, and control relays
• Supervision of up to 4 keypads
• Custom keypad text is fully programmable through RPS
• Full function menu including custom functions
• Authority by area and 32 character name for each user
• 14 custom authority levels control user’s authority to change, add, or delete
passcodes to disarm or bypass areas; and to start system tests
• Programmable primary and secondary language by user and keypad; select
from English, Spanish French, and Portuguese
For higher security applications, this feature guarantees that areas are always rearmed, and are disarmed for no longer than a specific, configurable, amount of time (for example, service time).
For added convenience, the installer can program one custom function. A custom function allows customers to complete complex tasks with fewer keystrokes. For example, a custom function can bypass a group of points and arm the system, allowing the user to perform this function with one easy command. Installers can use custom functions to control aparticular room. Customers activate a custom function with a keypad, with a keyfob, by faulting a point, or automatically as a scheduled event (SKED).
• Two-man rule. Requires two people with two unique passcodes to be present
at the time of opening.
• Early ambush. Allows users to verify that the facility is safe by requiring two
passcodes. The control panel sends a duress event if the user does not enter
the passcode a second time after inspecting the premises.
• Dual authentication. Requires two forms of identification before processing
certain system commands, including turning off the system and opening doors.
A standard system user must have a passcode, a credential (token or
card),and appropriate command authority permissions assigned in the door
and keypad’s assigned area.
Easy exit control
The control panel changes from one On (armed) state to another without turning off (disarming) the system. For example, if you change the state from Part On (Perimeter Arm) to All On (Master Arm), the control panel complies and reports the change. Easy Exit Control reduces the number of keystrokes, simplifying system operation.
Programmable passcode-controlled menu list
Passcode-controlled shortcuts provide users only with the options and information pertinent to them, simplifying system operation.
Monitor Delay/Delayed Response
Create a special point index that delays the reaction of a point for a specified time (up to 1 hour in minutes and seconds). This delay provides time for the specified condition to reset before activating any annunciation. The system can annunciate locally and send a report, if desired. When the system is armed, the point can respond like a normal point – providing dual functionality. Use this feature to ensure that perimeter doors have not been propped open, or to monitor critical areas such as computer rooms and safes, for example.
The system supports up to 10 users. Each user can have a personalized passcode, a wireless keyfob, and a credential to control the system. You can assign passcodes to one of 14 customized authority levels that can be restricted to operate only during certain times. Programmable primary and secondary language by user and keypad; select from English, Spanish, French, and Portuguese.
The control panel prioritizes and sends reports to four route groups. Network communication uses the Modem4 communication format, whereas phone communication uses Contact ID or Modem4 communications formats. Each group has a programmable primary and backup destination. The control panel provides flexible communications for most central stations with reporting capabilities such as:
• Individual point numbers
• Opening or closing reports by user and area number
• Remote programming attempts
• Diagnostic reports
The control panel uses on-board Ethernet (IP) connection (the on-board Ethernet port is excluded on “E” versions) to communicate with a Conettix D6600 or a Conettix D6100IPv6 Communications Receiver/Gateway.
The control panel can optionally communicate with a Conettix D6600 or a Conettix D6100IPv6 Communications Receiver/Gateway using a B426 Conettix Ethernet Communication Module or a Conettix Plug-in Cellular Communicator (B440/B441/B442/B443).
Using Conettix IP communication offers a secure path that includes anti-replay/anti-substitution features and provides enhanced security with AES 256-bit encryption (using Cipher Block Chaining (CBC)). The control panel supports Domain Name System (DNS) for both remote programming and central station communication. DNS provides ease of use, eliminating the need to use static IP addresses as your reporting destination, and accommodates a simple solution for central station disaster recovery. IP Setup is available via the keypad Installer menu and the remote programming software, eliminating the need to use complicated internet programming tools such as ARP and Telnet. The control panel supports both IPv6 and IPv4 networks.
For more information on the enhanced communications capabilities, refer to RPS Help or the control panel's Program Entry Guide.
The control panel accommodates up to four separate phone and four separate network paths to the central station receiver. When resetting alarms or turning a system on and off, the user is identified by name and number.
The control panel can send text messages and emails for personal notification over Ethernet or using a cellular communicator. You can configure up to 16 destinations using a combination of cellular phone numbers and email addresses. The control panel sends notifications in the user’s programmed primary language.
The system allows remote firmware updates through Remote Programming Software (RPS) using the RPS Firmware Update Wizard. The Firmware Update Wizard uses the on-board USB connection or the on-board Ethernet (IP) connection (the on-board Ethernet port is excluded on “E” versions) to transmit firmware update.
The control panel can optionally receive firmware updates from RPS using a B426 Conettix Ethernet Communication Module or a Conettix Plug-in Cellular Communicator (B440/B441/B442/B443). Notice! Cellular firmware updates require more time than Ethernet updates and carrier data rates apply.
• Control panel updates. Remotely update the control panel firmware for easy
feature enhancements without replacing ROM chips.
• Module update support. Remotely update the firmware on connected SDI2
modules for easy feature enhancements without visiting each
A wide variety of input options
• Accommodates normally‑open (NO) and normally‑closed (NC) devices with
end‑of‑line (EOL) resistor supervision.
• Accepts programming for fire, gas, fire supervisory, or intrusion applications.
• Supports hardwired and wireless devices.
Security and fire detection
The control panel provides 8 on-board points, and up to 8 additional wireless points. You can program individual points to monitor burglar alarms, fire alarms, and supervision devices.
The event log stores local and reported events. The event log includes information such as time, date, event, area, point, and user. View the event log from a keypad or use RPS to remotely retrieve event information. When the event log reaches a programmed threshold of stored events, it can send an optional report to a receiver. The log stores up to 127 local and reported events.
Scheduled events (SKEDs)
The internal clock and calendar start a scheduled event (SKED). A SKED performs functions such as turn on or off, relay control, or point bypassing.
• One scheduled event with up to 25 different functions
• Two opening windows and two closing windows
• Two user windows
• Day-of-week, date-of-month, or holiday only schedules
• One holiday schedule of 366 days (leap year)
Installers can perform limited programming on-site with a keypad (critical parameters; such as account IDs, central station and RPS IP addresses and phone numbers, reporting formats, and more). They can also do full programming on-site or remotely (attended or unattended) with RPS. A programmable system passcode prevents unauthorized remote programming.
Keypads and RPS offer diagnostic help for monitoring and troubleshooting. The diagnostics features allow you to view the status of the on-board Ethernet connection, plug-in communicators, and SDI2 devices, including inputs, outputs, and RF. The features provide the status of the control panel and its connected devices, such as firmware version, power, and missing conditions. View the status of each area. Diagnostics also include connection data for connected wireless and Ethernet devices.